NT WorkSafe has issued a safety alert to highlight the risks when using chains in towing or recovery operations.
Subscribe now for unlimited access.
$0/
(min cost $0)
or signup to continue reading
The safety alert comes after the death of a worker earlier this year in Maningrida.
The 50-year-old worker was fatally injured when a chain used in a towing operation failed and recoiled, striking the worker.
The worker was operating an excavator to tow another excavator, which had broken down.
The chain was attached to the chassis (frame) of the broken down excavator and to the quick clamp of the other excavator. The excavator being towed weighed approximately 36 tonne.
The chain, when it broke, recoiled, striking the worker who was sitting in the excavator cabin.
The safety alert contains a number of actions employers and workers should take before using chains in towing or recovery operations.
The NT WorkSafe investigation into the incident is ongoing.
Possible contributing factors - A risk assessment was not completed and safe work procedure were not developed for the recovery of the broken down excavator.
The chain used may not have been suitable for towing.
Some links in the chain showed signs of wear and damage.
The quick clamp on the excavator, where the chain was attached, was raised at the height of the cabin.
The excavator had previously been vandalised and the cabin glass was missing.
Action required - Conduct a risk assessment before you start work.
Consider covering the recovery equipment with a damper to absorb most of the energy in the equipment and reduce the risk of recoil from failure.
Consider the use of recovery tow strops instead of chains when recovering any vehicle/equipment.
If you choose to use chains (including accessories such as hooks and shackles), determine what you can use the equipment for by checking for any identification markings and referring to the manufacturers product guide.
The manufacturer's information will provide the safe working load limit (WLL) of the chain and accessories, and if the equipment is suitable for how you want to use it.
The identification markings indicate a chain complies with the mechanical properties and testing requirements for a specific Australian Standard.
Make sure the weight of the object you are towing is within the WLL of the chain used.
Inspect the chains before use for signs of damage or wear.
Do not use chains with damaged links.
Refer to the excavator's operating manual for appropriate attachment points for towing; avoid attachment points, which are in line with the cabin or the operator.
If your risk assessment has identified the potential for objects penetrating the cabin, consider installing cabin protective guards to provide an additional level of protection for the operator.
While you're with us, you can now receive updates straight to your inbox each Friday at 6am from the Katherine Times. To make sure you're up to date with all the news, sign up here.